What's New In The 3D Printer World

Prevention is the key

Over the last few weeks there have been posts on social media relating to fires being caused by 3D printers.

Continue reading
  16195 Hits
  3 Comments
Recent Comments
Kevin West
As mention this is controversial, and think this is a preferential choice. I have never had any issues with tinning wires includin... Read More
Sunday, 05 August 2018 01:23
16195 Hits
3 Comments

High Resolution Printing in Shorter Time

    Here at C3D we haveve been experimenting with how we can get the best quality prints in the least amount of print time. One idea that has been explored before is to combine infill for a certain number of layers. While similar features had been implemented in most slicers (Cura, Slic3r, Simplify3D) here is our take on it.

 

Minimum requirements1. Cura 3.2.1 or later2. Internet connection

Installation

1. Download the BoostedGcode.py python script from:https://goo.gl/6CGQQR2. Copy the file to Cura’s PostProcessingPlugin Script directory.    How to find the folder:    a) Mac: In the Menu click Help->Show configuration folder    b) Windows: In the Menu click Help->Show configuration folder3. Restart Cura

Continue reading
  15201 Hits
  0 Comments
15201 Hits
0 Comments

X - Y Axis

X - Y Axis

One of the biggest flaws in my opinion of the X5S are the belt pulley mounts, as the load placed on them when the belts are in tension is located in one point on each fixing.

Continue reading
  14232 Hits
  0 Comments
14232 Hits
0 Comments

Z - Axis Linear Rail Installation

Z - Axis Linear Rail Installation

Preparations the key for the rails to run correctly, and lubricating the rails is best done prior to installation.

Continue reading
  13900 Hits
  0 Comments
13900 Hits
0 Comments

Z Axis Mount

Z-Axis Mount

I reccomend you replace the Z-Axis mount even if you do not intend to use a linear rail.

Continue reading
  14226 Hits
  0 Comments
14226 Hits
0 Comments

Scott's Printable Printer Upgrades List

    OK Scott Here again. I keep getting asked what parts I use on my printers so I figured I would build a list. starting with general parts. Now this list is just for the printers I have. I’ll also add notes about each as I build the list. Now this is by no means all the parts I have on my printers as some of them I don’t have links to some are prototypes of my own design and some I just didn’t think of it’s also not the only options for these designs as I’m sure most of them have copies or versions out that might work better for each person. I will try to update this as I find or design other parts. Or if you know of something worth adding to the list let me know.

Misc printer related items

Bowden tube cutter

I designed this after seeing a bunch of issues caused by Bowden tube not being cut straight

Bowden tube cutter

Continue reading
  21800 Hits
  2 Comments
Recent Comments
Steve Czerepak
Scott: I am having a problem with my X5S... I can run my X axis left and right with no problem.. ...... when I run my Y axis away... Read More
Wednesday, 13 November 2019 02:35
Scott Worthington
Sounds like I binding or rubbing issue
Wednesday, 13 November 2019 13:08
21800 Hits
2 Comments

Customized Tronxy X5S Frame

The frame of the printer is the most important part, and if you get this part of build wrong everything else will go out of whack very quickly. I do not recommend printing certain part for strength and stability reasons.

Continue reading
  13830 Hits
  0 Comments
13830 Hits
0 Comments

Customized Tronxy X5S

I keep on getting asked to keep members of Groups on Facebook to keep the upto date with the Customisation of My second X5S. So I have created a special section on our forum to create a build log,

Continue reading
  18005 Hits
  3 Comments
Recent Comments
Gernot Lepuschitz
Hi - you wrote: "So I have created a special section on our forum to create a build log..." - but I cannot find this section in th... Read More
Thursday, 24 October 2019 09:03
Dale Johnston
Scott; Finally got around to installing the motherboard for the x5s that i got off you. Works but it has a problem. Thought it was... Read More
Monday, 10 February 2020 22:53
Scott Worthington
You do not connect to the firmware at all you can do a gcode file with the needed changes and save code run as print then reboot p... Read More
Monday, 10 February 2020 23:05
18005 Hits
3 Comments

Chitu G code Explained

        Once again Scott Here to see if I can’t help you understand the something else I have seen questions about in the 3D printing community.  This Time around I’ll go over the G-code used By Chitu on their F mini control board and other custom made control boards used by Tronxy and several other companies now. This control board comes on the Tronxy X5SA, X5ST, X5S-E2, XY-3 and XY-2 to name a few.
 
PLEASE NOTE CHANGING THESE SETTING WILL change your printers behavior. Therefore I do not recommend changing settings yourself without understanding what each setting your adjusting does.

Continue reading
  144194 Hits
  99 Comments
Tags:
Recent Comments
Scott Worthington
What you need to do to turn on heated bed is open notepad then type m8027 t1 M8500 Then save file to SD card. Then go to file ri... Read More
Friday, 27 April 2018 14:16
John Shummy
So unlike marlin you can upload seperate commands instead of the whole file?
Friday, 27 April 2018 20:22
Scott Worthington
Yes your uploading g code to change setting not complete firmware
Friday, 27 April 2018 20:23
144194 Hits
99 Comments

Tronxy X5S to X5SA Upgrade kit installation

          OK Scott Here again like normal. This time I had a little help from Norman Gilman with some pictures and a few of the steps, helping to get my mind in gear to write this. Now please note Neither Norman Or I installed these setup with the auto bed leveling because we use glass beds to thick for the factory blue sensor to see the bed through the glass.

Continue reading
  40549 Hits
  6 Comments
Recent Comments
Tony Nutt
great guide! how do you like the E3d mount you have in the picture? I am debating which one to do before I do my upgrade
Wednesday, 06 June 2018 14:41
Tony Nutt
So I completed the Upgrade last night I turned on the power had the touch screen was working well. turned it off and now i turn it... Read More
Sunday, 10 June 2018 17:14
Mike Bentley
ive only just installed this kit having putting it off for 6 months excellent no problems and its far better than the original dri... Read More
Wednesday, 13 March 2019 02:12
40549 Hits
6 Comments

Flashing Tronxy X5S Factory Control board USB Cable only

Ok so Scott here again, this time I decided to go ahead and take things to a simple level based off a write up done by Syed Muhammad Shaheryar. I have seen so many comments and issues with people flashing firmware to their factory TronXY X5S control board, now this should work for flashing the firmware on the X3S as well but the firmware I included will need some edit work unlike for the X5S. This Version of Arduino IDE will work just like any other but it can be installed on a thumb drive or SD card  and moved from one computer to the next without having to install anything on that computer. it should also work on other boards but I have not tested it.

Continue reading
  62439 Hits
  62 Comments
Recent Comments
Scott Worthington
By doing it this way You can copy the same file onto a thumb drive and run off ant windows computer. and use to flash other boards... Read More
Saturday, 24 February 2018 01:52
Scott Worthington
If you do not fallow it step by step this might happen. If you had arduino installed before you must remove it first as this versi... Read More
Tuesday, 06 March 2018 19:23
Scott Worthington
While I have seen this work on Windows 10 I have also seen it be an issue if you have another Windows 7 computer I would try that.... Read More
Tuesday, 06 March 2018 19:32
62439 Hits
62 Comments

To keep the site live and make improvements Please consider Donating. Thank you for your donation.